无机玻璃钢复合风管的工艺分成六大部分，施工准备、板材切割、风管制作、风管验收、风管连接和风管吊装。根据施工现场情况及设计图纸，画出风管的加工草图，做好施工准备。对于风管的连接则采用无法兰错口的插接，专用的胶粘接。用钢丝刷将风管对口纵向粘接满上的泡沫材料，然后连接面涂胶。将两段连接的风管靠紧，上下左右平直，准确对位。

The technology of inorganic glass steel composite wind pipe is divided into six parts: construction preparation, plate cutting, wind pipe production, wind pipe acceptance, wind pipe connection and wind pipe hoisting. According to the construction site and design drawings, draw a draft of the wind pipe processing, do a good job to prepare for the construction. For the connection of the wind pipe, there are no flanged and wrong inserts, and the special adhesive is used. A steel wire brush will be used to paste the foam material of the air pipe to the mouth, and then the surface is glued to the surface. The two section of the connection of the wind pipe tight, straight up and down, accurate position.